Clean Room Interlocking Systems

Product Price :Get Latest Price

Description :
In the process of material transfer from unclassified area to classified area pass boxes are used. The doors are interlocked such a way that doors cannot be open at the same time, due to which pressure losses and bacterial contamination doesn''t takes place throughout the material transferring process. The prevention of simultaneous access of doors is been achieved by our Pass Box controller by ensuring that when one door for a Pass box is open then other doors closed.
Features:
 

Advanced micro controller based 2Door or 3Door STATIC/DYNAMIC Passbox interlocking system.

Status indications with High intensity RED color BAR LED''s.

Door Status indications like “GO”, ”WAIT”, “CLOSE DOOR”, “DOOR OPEN” messages or “LOCKED”, “RELEASED” for every pushbutton.

Buzzer output for door is kept open more than pre-programmed time from 1 to 30 min.

Timer value can set by using 3keys keypad.

Password protection for Timer value setting.

Timer value can set maximum of 999 sec/mins.

When Door 1 is opened the display on the Door 2 and Door 3 will indicate “WAIT” and at the Door 1 the display will indicate “DOOR OPEN”.

When any of the Door is kept open beyond a particular time say 2 min, buzzer will be blown and the display at the doors will indicate “CLOSE DOOR”.

UV Lamp controlling.

Blower fan controlling.

CF Lamp controlling.

All Doors are provided with Electromagnetic locks/Electric Strikers.

3 digit 0.39” 7-Segment RED LED to display the timer value.

Soft-touch membrane keypad provided to program timer values.

3mm Diffused red LED for Blower failure Indications.

Soft-touch membrane keypad provided to program timer value.

Soft-touch membrane keypad provided to control LAF/BUF controls.

3mm Diffused Bi-Color LED indication to display ON/OFF status of UV,CF, Blower.

Door delay time: pre programmed as per the requirement.

Specifications:

Mode of Operation: NC or NO.

Pushbutton Inputs based on Doors MAX up to 3 Doors.

Door Feedback Inputs based on Doors MAX up to 3 Doors.

Door Control Outputs based on Doors MAX up to 3 Doors.

LED Indications for push buttons: GO/WAIT.

Relay Specifications:Contact Material: Silver Alloy.

Contact Rating: 230V AC / 2 A.

No. of Operations

Mechanical: 107.

Electrical: 105.

Input Voltage: 24Watt at 80-280VAC, 50Hz.

Operating Voltage: 12V / 24V DC.

SPB105D: Tactile push button to open Door.Bar LED’s dimensions8mmx21mmNo. of Bar LED’s6 to display GO, WAIT, OPEN DOOR and CLOSE DOOR messages.Interface with ControllerDB9 Cable.Operating Voltage:12V/24V DC.Audible Indication5V buzzerMechanical Dimensions40mm L x 185mm W x 30mm D. SPB105P: Soft Touch keypad.Bar LED’s dimensions8mmx15mmNo. of Bar LED’s2 to display GO, WAIT message.Interface with Controller:4 Core Cable.Operating Voltage:12V/24V DC.Audible Indication5V buzzerMechanical Dimensions85mm L x 40mm W x 25mm H.